RcTek - Komatsu Zenoah G230RC Dyno Results

RcTek : Zenoah G230RC Engine Dyno Results Analysis - BHP

Home

Technical Information


	We thank Alro Racing Systems for allowing us access to the dyno results for the Zenoah G230RC large scale car engine. The engine was tested on no less than eleven different pipes on the dyno and used the same fuel. Also worth noting is that none of the pipes tested were optimised for this engine.

Section Contents

	Model Car Engines
	Engine Terminology
	Zenoah G230RC Dyno Results
	Zenoah Engines
	Dyno Information
	Blueprinted Engines
	Zenoah GoPed FAQ

Brake Horsepower Analysis (BHP)

Show below is our graph that allows you to easily compare the brake horsepower produced by the exhaust pipes used in this test.

Dyno Result Analysis
Brake Horsepower (BHP)	Newton Meters (Torque)	Brake Mean Effective Pressure (BMEP)

Dyno Result Charts
Below are links to the individual results for all eleven pipes.
Samba 2	FG 3 Chamber 5-013	FG 4 Chamber 5-028
FirstOne FG 02	FirstOne FG 03	FirstOne FOD 01
FirstOne SVM 02	First One SVM 03	SVM 3 Chamber
Lauterbacher 3 Chamber	Lauterbacher 4 Chamber

Further Information

For help with the terms used throughout this series of pages, please see the Engine Terminology section.

All dyno results courtesy of Alro Racing Systems.

If you have any comments or suggestions about this or any of the other R/C car content on the RcTek site, please feel free to ask them on our On-line Forum

Home Technical Information FAQ Tips & Tricks Car Information Site Map Forum Links