|
|
 |
 |
 |
|
 |
| |
We were trying to track down parts for the car below and although the owner has been successfully
supplied with some parts, he still wants others. |
 |
|
 |
|
|
 |
|
|
|
|
|
| Parts Request by William Talavera |
| Parts are required for the PB International car (which dates from the 1970's) shown below. If you have any, please email William Talavera as he is restoring one of the cars to its former glory. |
| Below are a couple of pictures that may help anyone who has some old car parts in their shed, pit box, etc.. |
 |
| The above picture should bring back memories for many of you out there. To us younger ones it looks more than a bit pre-historic. By all accounts, the car was the business and it probably was (it's over twenty years old!) |
 |
| The above picture shows a close up view of the area the parts that William needs to be able to run this car. The flywheel is held in place by a pinch bolt and the pinion he requires is (I think) a ten (10) tooth variety, although anything that fits will be OK. |
| Summary |
| If anyone could help, please email William Talavera as soon as possible. |
| If anyone else has any requests for parts for cars of the past, please contact us |
| Further Information |
| If you have any comments or suggestions about this or any of the other R/C car content on the RcTek site, please feel free to ask them on our On-line Forum |
|
| Unless stated otherwise all images and content are Copyright (c) RcTek 2000/2001 |
|
