This article is part of our Tips section, which aims to provide information regarding tips, tricks and modifications to a particular car or part, ones that don’t really warrant a specific article. The Technical Information section contains information regarding a wide range of subjects.
If you have any tips you would like to pass on to the racing community, please contact us.
The standard plastic battery moulding on the FG Modellsport large scale cars has a tendency to sag under the weight of the battery pack hung underneath.
Whilst you can buy a carbon fibre upgrade a simple solution is shown on the right, with a piece of aluminium tubing cable tied to the top.
Many thanks to Harry van der Heijden for translating this tip into Dutch.
Deze tip is er ook in het Nederlands op http://1op5paddock.nl.nu (site not available December 2008).