RcTek Home  RcTek : Radio Controlled Model Car Two Speed Transmissions
Home Technical Information FAQ Tips & Tricks Site Map Forum Links  
  Two speed transmissions are an increasingly popular fitment on radio controlled model cars today,
whether they are a standard fitment, or are fitted as an upgrade.

This section of the RcTek site is devoted to informing the model car owner about the various different aspects of two speed transmissions.
R/C Model Car Info  
Section Contents
  Two Speed Transmissions - Different Designs
The two speed transmission design that is featured predominantly throughout this section is based on that used by Serpent Model Cars for their range of radio controlled cars. Designs from other manufacturers vary, but almost all work using the same basic principles.
  Two Speed Transmissions - How They Work
This article explains the principles involved and also introduces the parts used.

It then continues by using Macromedia Flash content to show you how model car two speed transmissions work. MoreRead More..
How Two Speed Transmissions Work
  Two Speed Adapter
The two speed adapter can develop problems after long service period that results in erratic or non-existent gear changes. This article aims to tell the model car racer how and why this happens and offers solutions and the benefits of alternatives. We also have a suggestion for a solution to problems with removing the adapter. MoreRead More..
Two Speed Transmissions
Two Speed Transmissions Two Speed Transmissions Two Speed Transmissions
Two Speed Transmissions
  Two Speed Clutch Bell
The two speed clutch bell can wear and cause problems for the model car owner. This article explains what the symptoms are and offers a few solutions.

It uses Macromedia Flash content to illustrate one of the problems. MoreRead More..
Two Speed Clutch Bell
  Ball Bearing Adjuster/Actuator Problems
The ball bearing adjuster/actuator assembly can wear and/or deform, which can potentially cause a problem to the model car racer with his two speed transmission. MoreRead More.. Ball Bearing Adjuster and Actuator
  Dust Caps
The dust caps provided with your model car are there to stop dust and other contaminants from entering the assembly and stopping it from working properly. For this reason you should always make sure that they are fitted to the car. They are inexpensive parts and should be replaced immediately if lost. Two Speed Dust Cap
Further Information
If you have any comments or suggestions about this or any of the other R/C car content on the RcTek site, please feel free to ask them on our On-line Forum
Top of Page
Home  Technical Information  FAQ  Tips & Tricks  Car Information  Site Map  Forum  Links